It seemed like there was plenty of space behind the panel until I actually started filling it with wire harnesses today. I don't think I quite grasped how full the ACM would be. By the time I was finished plugging things in, it was so full I had a hard time even tightening the Dsub screws. The downside of having harnesses from AFS is that they aren't the length I would have made myself. So some fit perfectly, and others have enough extra that I have to make a tiny loop.
I used the panel stiffeners as a place to put adel clamps and run most of the wires from the right side of the panel to the ACM. That bundle is going to be really close to where the canopy frame swings when closing and opening, but I think it should clear. If I find it doesn't, I will rotate the adel clamps around and put the wires on the aft side.
I installed the headset jacks. The lemo plug is the black one on the outside, and the standard 2 plug headset jacks are the silver ones.
Next up was the wiring for the Pmag switches. I still need to clean up the routing of those wires, as well as run the wire for the master switch.
